Re-siding a house is one of the biggest exterior upgrades a Southern California homeowner can make. It also leaves a big pile behind. Panels, nails, house wrap and trim add up fast, and most of it can’t go in your trash cart. This guide covers how to sort siding debris, which materials need special handling under California rules, and how to get it hauled away in Los Angeles, Orange County and the Inland Empire.
Every siding material goes somewhere different. Before anything comes off the wall, identify what’s on your house. Most Southern California homes have one of these:
The last two can look alike. Modern fiber cement and old asbestos cement shingles are both gray, heavy and rigid. If your house was built before 1980 and you aren’t sure what’s on it, get the siding tested before anyone cuts, pries or breaks it.
Asbestos cement siding is fairly stable while it stays intact on the wall. The danger starts when it gets broken, drilled or crushed, because that releases fibers into the air. California’s Department of Toxic Substances Control (DTSC) regulates asbestos waste, and it has its own packaging, labeling and disposal requirements. You can’t toss it in a dumpster with regular construction debris.
If a lab test confirms asbestos, removal belongs with a licensed asbestos abatement contractor. They wet the material, keep it in one piece, seal it in labeled bags or wrapping, and take it to a facility permitted to accept it. Junk removal companies, including ours, don’t haul asbestos-containing material. Once the abatement crew is done, though, we can clear out everything else: the trim, the gutters, the old house wrap and the rest of the job-site debris.
Lead paint is the other thing to watch for on homes built before 1978. Under the EPA’s Renovation, Repair and Painting (RRP) Rule, anyone paid to disturb painted surfaces on a pre-1978 home has to be lead-safe certified and follow lead-safe work practices. For exterior work, the rule kicks in once more than 20 square feet of paint is disturbed, and most siding jobs pass that easily.
In practice, that means painted wood siding from an older home should come down in whole boards, not be sanded or power-washed off the wall. Chips should be caught on plastic sheeting and bagged. Hire a contractor who carries an EPA lead-safe certification and can show it to you.
Metal siding is the easiest to deal with because it’s worth something. Scrap yards across Southern California take aluminum siding, gutters and downspouts. Pull out as many nails and as much foam backer as you can before it goes. For more on how metal gets sorted and recycled, see our scrap metal removal and recycling guide.
Vinyl (PVC) can be recycled in theory, but very few facilities take post-consumer vinyl siding, and dirty or broken panels are usually rejected. Most of it is disposed of as mixed construction and demolition (C&D) debris. Clean, intact panels are worth offering to a Habitat for Humanity ReStore.
Painted, stained or treated wood siding is not green waste. Don’t put it in your yard waste bin. Untreated, unpainted lumber can sometimes go to wood recycling, but most old siding is coated and goes out as C&D debris. Pressure-treated boards have stricter rules. Our treated wood disposal guide explains California’s treated wood waste requirements.
Modern fiber cement contains no asbestos, but cutting it releases crystalline silica dust, so crews should score and snap it or use dust-collecting saws. The finished debris is heavy and goes out as C&D waste.
If your siding project needs a building permit, California’s Green Building Standards Code (CALGreen) usually requires that at least 65 percent of the job’s construction and demolition waste be recycled or diverted from landfill. Many cities in Los Angeles County, Orange County and the Inland Empire add their own C&D ordinances, deposits or reporting forms. Using a hauler that takes debris to sorting and recycling facilities makes that requirement much easier to meet. Our construction debris guide for contractors goes into more detail.
At 911 Junk CA, siding debris is priced by how much space it takes up in our truck, with weight factored in for heavy materials like fiber cement. You get a firm price on site before any work starts, and loading is included. For details, see how our pricing works.
Whether you’re replacing siding yourself or cleaning up after a contractor, 911 Junk CA hauls non-hazardous siding debris, trim, gutters and other exterior renovation waste across Los Angeles, Orange County and the Inland Empire. We sort for recycling wherever we can and leave your yard swept. Contact 911 Junk CA today for a free quote. Send us a few photos of the pile and we’ll take it from there.
Service Areas